bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Gulf Stream


  • Recommended Adjustable Cushioned Ball Mount for 2" Hitch on 2020 Chevy 2500HD
  • I have a solution for you, but the Curt Rebellion XD # C45949 is not compatible with weight distribution hitches. Instead, I recommend using the Gen-Y Ball Mount # 325-GH-1224, which has a 16000-lbs capacity and can give you up to 5" of drop to help ensure that your trailer is towed level. This ball mount also has a dual hitch ball (2" and 2-5/16") to allow you to tow both of your trailers, so it's a flexible option that will allow you to cover a lot of different setups. I've linked a...
    view full answer...

  • Curt Friction Sway Control for the Curt MV Weight Distribution System
  • If you'd like to add a friction sway control to your Curt MV Weight Distribution System, part # C17063, we have Curt's part for that. It's the Curt Friction Sway Control for Weight Distribution Systems, part # 17200. It's the same sway control unit that comes with the MV System. I've included a video review of the sway control for you.
    view full answer...

  • Parts Needed to Install 4-way Connector on 2014 Nissan Frontier to Connect Tailgate LED Light Bar
  • Most of these tailgate light strips connect with a standard 4 way trailer connector, so the Curt # C56225 is exactly what you're looking for. This kit comes with the 4 way plug and all of the relays you'll need to install on the vehicle to activate the trailer tow lighting circuits. I've linked an installation video of this harness for you to refer back to during installation.
    view full answer...

  • Recommended Brakes, Hubs and Drums for Timbren 3500 HD System with 4 Inch Lift
  • The correct hubs for a Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 will have a # 25580 inner and # 15123 outer bearing, so the # 84546UC3-EZ hub and drums will not work. Instead you'll want to use the # 8-201-9UC3-EZ, which are going to require 12" brakes like the # AKEBRK-7-SA. You may also need some brake mounting hardware # BRKH12 to mount the brakes on the drums. This would give you the compatible parts needed to create...
    view full answer...

  • Will Hatch Huggers Work for Side Straps on my Saris Bones EX 3 Bike Rack?
  • The Hatch Huggers for Saris Trunk Mount Bike Racks # SA3035 will work with the rack's side strap carrier buckle of the Saris Bones EX 3 # SA803. Since the Hatch Huggers have a length of a little over 6 feet, it will give you plenty of length to get that secure, tight fit. I went ahead and attached the picture to show you that the Hatch Huggers can attach to the side strap buckles.
    view full answer...

  • Bearing Kit for Dexter Trailer Axle with Standard Spindles
  • The bearing kit that fits the Dexter trailer axle # T20BTR-7258 is part # BK1-150. This includes two bearings, two races, a 10-60 seal, EZ Lube spindle washer, and cotter pin. The bearings included in this kit are a match for the inner and outer bearings for the # T20BTR-7258 axle. You will want to make sure that the races and seal will fit inside the hub you will be using. The seal has an outer diameter of 1.987 inches and the races have an outer diameter of 1.980 inches. If you do...
    view full answer...

  • What is Needed to Tow a 2010 Chevrolet Impala LTZ
  • According to the online owner's manual for your 2010 Impala that I found on the Chevrolet website, your vehicle cannot be flat towed (please see page 5-25). Chevrolet indicates that the drivetrain components would be damaged. There is no indication from Chevrolet that installation of a lube pump will avoid this concern so until a qualified technician from Chevrolet can give you assurance that flat towing can be accomplished safely, I do not recommend anything except dolly towing. We offer...
    view full answer...

  • Is A Brake Controller Needed on Motorhome To Use Tow Dolly Brakes
  • If your motorhome does not have a brake controller, you will need to install one to utilize the electric brakes on the tow dolly. I recommend the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. This brake controller has an easy-to-read LED display and preforms continuous diagnostic checks to alert you to any potential problems. I have attached a review video of this brake controller for you. The brake controller will need to be hardwire installed in your motorhome. If your motorhome...
    view full answer...

  • Parts Needed For Adding a 7-Way Trailer Connection and Brake Controller to a 2022 Subaru Forester
  • For your 2022 Subaru Forester you will first need a T-One Vehicle Wiring Harness # 118467 to tie into the tail lights on your vehicle to provide the lighting for the 7-way. This will plug into the Universal Installation Kit for Trailer Brake Controller # ETBC7 which also provides you with the wiring needed to install a brake controller. I have linked an installation video below that you can reference on the installation that was done on a 2015 Forester. A Mounting Bracket # 18140 will allow...
    view full answer...

  • Parts Needed to Convert Existing Surge Disc Brakes to an Electric Over Hydraulic Braking System
  • According to my research, the OEM controller on your 2012 Ford truck is compatible with electric over hydraulic braking systems. You could use the Tekonsha P3, it's a great unit that works great and is very user friendly, but it's not necessary. You'll need to either disable the existing surge coupler by putting a bolt through from side to side to prevent the coupler from compressing or replace it. You'll need to choose the appropriate replacement coupler based on the dimensions of the...
    view full answer...

  • Which Firestone Air Spring Kit Spacer for Use with Ride-Rite Air Spring Kit # F2550
  • Since your Firestone Ride-Rite Air Helper Springs # F2550 mount to your axles you will use spacer kit # F2375. The other 6-inch spacer you referenced, part # F2374, is the correct spacer for air spring kits that mount to the leaf spring stack.
    view full answer...

  • Front Mount Receiver for 2008 Ford Explorer
  • We do indeed offer a 2 inch front mount receiver for a 2008 Ford Explorer, it is part # 31545. The hitch has a 9000 lb line pull capacity and a 500 lb vertical load capacity. I've linked to the installation instructions for you.
    view full answer...

  • Recommended Camco Olympian Heater for 33 Foot Long 5th Wheel Trailer
  • The Camco Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs # CAM57341 is a good choice for heating up to 230 square feet of space, but it sounds like you're likely going to be better off with the Camco Olympian Wave 8 Catalytic Safety Heater for Large RVs # CAM57351 which can heat up to 290 square feet. Considering that you're not heating the bedroom and keeping door closes the Wave 8 should be more than enough to keep everything warm. These units work of propane gas, can be wall...
    view full answer...

  • Does the Precision Tool 2.5 Watt Solar Charger Work on 6v Batteries
  • I have a solution for you to keep the 6v battery charger on your tractor maintained, but the # PTW2997 is only designed for 12v batteries. However, you can use the Duracell Battery Charger and Maintainer # DU27FR to keep the battery charged and it would do a great job. This charger uses automatic multi-stage charging to extend battery life, so you'll never have to worry about over-charging. We do not currently offer a solar setup capable of charging a 6v battery.
    view full answer...

  • Bearing Protectors for Zieman F-714 Trailer
  • You'll either need to clean and repack your bearings by hand or use a Bearing Buddy bearing protector, which is available for many different hub bore sizes. If you'd care to reply with either the reference number from your outer wheel bearing or the inside dimension of the hub bore where the grease cap sits, I'd be happy to see if we offer a compatible Bearing Buddy. The # BB1980A-SS Bearing Buddy you'd looked at fits a 1.980 inch diameter hub bore that uses a L44643 or L44649 outer wheel...
    view full answer...

  • Parts Needed to Mount Ski and Snowboard Carrier on 2009 Infiniti G37x
  • In order to carry skis or snowboards using a rack like the Thule SnowPack Ski and Snowboard Carrier - 6 Skis or 4 Boards - Black # TH7326B, you will need a roof rack system since these do not mount to naked roofs. If you've got a factory roof rack system, the # TH7326B, # TH7325 and Kuat Switch 4 Ski and Snowboard Carrier - 4 Pairs of Skis or 2 Boards # KU94FR are designed to fit on factory roof rack crossbars, so they would all work without any additional parts. If you don't have a roof...
    view full answer...

  • Recommended RV Speakers for Use with Polk Heavy Duty Mechless Stereo
  • You can use pretty much any speakers with the Jensen # JHD910BT. I recommend using the Jensen Coaxial Indoor RV Speaker - Recessed Mount - 6" Diameter - 50 Watts - Black- Qty 1 # 1103030 as the basic speakers, which are a recessed mounting speaker that will provide high quality, high frequency sound. I would then pair these speakers with something like the Furrion RV Enclosed Amplified Subwoofer - Surface Mount - 15-3/4" x 9-7/8" - 120 Watt # FSW8P12CF to provide you with a well rounded...
    view full answer...

  • Recommended Windshield Wiper Replacements for 2011 Newmar King Aire
  • It looks like the 2011 Newmar King Aire has a 32" long windshield wiper, so the ClearPlus # CP77321 will work for you as long as your coach has either a 1/2" - 5/8" wide saddle or a 12x4 hook. These are the two common installations for a windshield wiper, so you'll want to confirm that yours attach in a similar manner.
    view full answer...

  • Can Trailer With 10,000 lb Axles Switch from 16-1/2 to 17-1/2 Inch Wheels and Tires
  • Yes, you can switch from 16-1/2 inch to 17-1/2 inch wheels and tires on your equipment trailer with 10,000 lb axles. You just need to make sure the wheels have the same bolt pattern and work with the wheel bolts size of your hub and you're good to go. For example, the Provider 215/75R17.5 Radial Tire with 17-1/2" Silver Mod Wheel # TA95ZR has a 4,805 lb capacity, an 8 on 6-1/2" bolt pattern and needs a hub with 5/8" wheel bolts. I have added a link below to our entire selection of 17-1/2"...
    view full answer...